Suppose a solution was too concentrated for an accurate reading with the spectrophotometer. the concentrated solution was diluted by placing 1.00 ml of the concentrated solution in 4.00 ml of water. the solution was then placed in the spectrophotometer and an absorbance was obtained and after a few calculations the molar concentration was calculated to be 3.5 × 10–6 m. what was the concentraion of the original solution

Explain why scientists use shared characteristics to make cladograms.

Hot air balloons float in the air because of the difference in density between cold and hot air. in this problem, you will estimate the minimum temperature the gas inside the balloon needs to be, for it to take off. to do this, use the following variables and make these assumptions: the combined weight of the pilot basket together with that of the balloon fabric and other equipment is w. the volume of the hot air inside the balloon when it is inflated is v. the absolute temperature of the hot air at the bottom of the balloon is th (where th> tc). the absolute temperature of the cold air outside the balloon is tc and its density is ďc. the balloon is open at the bottom, so that the pressure inside and outside the balloon is the same. as always, treat air as an ideal gas. use g for the magnitude of the acceleration due to gravity.

(1.6 × 10-19)(5.0 × 106) = c × 10d identify the missing numbers below to show the result of multiplying the numbers.