Declare and initialize the following variables: int monthOfYear, initialized to the value 11 long companyRevenue, initialized to the value 5666777 int firstClassTicketPrice, initialized to the value 6000 long totalPopulation, initialized to the value 1222333.

Design a pos circuit that displays the letters a through j on a seven-segment indicator. the circuit has four inputs w, x, y, and z which represent the last 4 bits of the uppercase ascii code for the letter to be displayed. thus, if wxyz = 0001 then "a" will be displayed. (any answer with 22 or fewer gates and inverters, not counting any for the inputs, is acceptable)

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

List 3 items that were on kens resume that should have been excluded