You manage 2 folders in your computer as follows:
C:\Confidential
C:\PublicReports
The C:\ drive is formatted with NTFS, and the D:drive is formatted with FAT32. in the C:\Confidential folder, you edit the properties for the following two files and assign the Deny Read permission to the Users group:
Reports. doc
Costs. doc
You then take the following actions:
Move Reports. doc from C:\Confidential to D:\PublicReports.
Copy Costs. doc from C:\Confidential to D:\PublicReports.
What happens to the permissions for both files as they are created in the D:/PublicReports folder?
a. Permissions are removed from Reports. doc but kept for Costs. doc
b. Permissions are kept for Reports. dox but removed from Costs. doc
c. Permissions are removed from both files
d. Permissions are kept on both files.

Let r be a robotic arm with a fixed base and seven links. the last joint of r is a prismatic joint, the other ones are revolute joints. give a set of parameters that determines a placement of r. what is the dimension of the configuration space resulting from your choice of parameters?

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

Write a function called checkfactor that takes two arrays of positive numbers, firstnumberrow and secondnumberrow. checkfactor checks if the first entry in firstnumberrow is divisible by the first entry in secondnumberrow, and performs the same operation on the next array elements until all entries have been checked. all the numbers are positive and the number of entries in the arrays are the same. the function should return the identified divisible numbers in two row arrays named firstdivisible and seconddivisible.restrictions: branches or loops should not be used. the code must use the internal mod and logical functions.hint: the mod function should be used to determine if two numbers are divisible. ex: for num1 and num2 if mod(num1,num2) is 0, then the two numbers are divisible.this is matlab