Circuit-switched networks provide connection between two parties that: slicing up the conversation into smaller chunks and transmitting them over a shared circuit that mixes content with other callers but routes and reassembles a call to the correct recipient. prioritizing voice calls over other connections on IP networks. uses a single router for each individual on either end of the connection. is dedicated for use by the parties for the duration of a connection. repeatedly switches between an open and closed state depending on whether someone is speaking or other noise is being transmitted during a call.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.