Consider the following scenario: The asset value of your company’s primary servers is $2 million, and they are housed in a single office building in Anderson, Indiana. Field offices are scattered throughout the United States, but the workstations located at the field offices serve as thin clients and access data from the Anderson servers. Tornados in this part of the country are not uncommon, and it is estimated that one will level the building every 60 years. Which of the following is the SLE for this scenario?
a) $2 Million
b) $1 Million
c) $500,000
d) $33,333.33

Check my work the microprocessor is a(n) circuit, which is designed to process data based on a set of instructions. most desktop and laptop devices contain a microprocessor based on the standard. most tablets and smartphones contain processors based on technology. a microprocessor's circuitry is designed to perform a limited number of tasks contained in its set. during processing, an instruction is loaded into the processor's unit. data is loaded into registers in the processor's where arithmetic and logic operations are performed. microprocessor performance can be measured by its speed. other factors affecting overall processing performance include word size, cache size, and instruction set complexity. most digital devices contain only one microprocessor chip, but today's multi- processors contain circuitry that supports parallel processing. computers contain various kinds of memory. random memory is a special holding area for data, program instructions, and the system. it stores data on a temporary basis until the processor makes a data request. ram is different from disk storage because it is , which means that it can hold data only when the computer power is turned on. computers also contain read- memory, which is a type of non-volatile memory that provides a set of "hard-wired" instructions, called the loader, that a computer uses to boot up.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

This question involves a class named textfile that represents a text file. public class textfile { private string filename; private string filename; private arraylist words; // constructors not shown // postcondition: returns the number of bytes in this file public int filesize() { } // precondition: 0 < = index < words.size() // postcondition: removes numwords words from the words arraylist beginning at // index. public void deletewords(int index, int numwords) { } // precondition: 0 < = index < = words.size() // postcondition: adds elements from newwords array to words arraylist beginning // at index. pub lic voidaddwords(int index, string[] newwords) { } // other methods not shown } complete the filesize() method. the filesize() is computed in bytes. in a text file, each character in each word counts as one byte. in addition, there is a space in between each word in the words arraylist, and each of those spaces also counts as one byte. for example, suppose the words arraylist stores the following words: { mary had a little lamb; its fleece was white as snow. } the filesize() method would compute 4 + 3 + 1 + 6 + 5 + 4 + 6 + 3 + 5 + 2 + 5 as the sum of the lengths of each string in the arraylist. the value returned would be this sum plus 10, because there would also be 10 spaces in between the 11 words. complete the filesize() method below: // postcondition: returns the number of bytes in this file public int filesize() { }