subject

Write a single 16-bit LC-3 instruction (in binary) that sets the condition code bits (N, Z, P) according to the value in R0, but does not change any register values. For example, if the current value in R0 is negative, then the N bit should be set after your instruction is executed. But the value in R0 (or any other register) must be unchanged.

ansver
Answers: 2

Another question on Computers and Technology

question
Computers and Technology, 22.06.2019 23:50
You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?
Answers: 3
question
Computers and Technology, 23.06.2019 14:00
Select the correct answer. andre was recently hired by an organization to check for system vulnerabilities. he is supposed to exploit these vulnerabilities and create a report on the extent of damage to which the system was susceptible. what position does andre hold in this organization? a. information security analyst b. information assurance manager c. penetration tester d. network security engineer e. chief information security officer
Answers: 2
question
Computers and Technology, 23.06.2019 18:30
Report all segments of identity by descent longer than 20 polymorphisms between pairs of individuals in the following cohort of 15 individuals across 49 polymorphisms: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 numeric input 2 points possible (graded) you have 2 attempts to complete the assignment below. for example if the sequence is "bcd", which occurs in "abcdef" , the starting point would be 2 (b), and the finishing point would be 4(d). individuals 7,10 between positions
Answers: 1
question
Computers and Technology, 23.06.2019 21:30
To move a file or folder in microsoft windows, you can click and hold down the left mouse button while moving your mouse pointer to the location you want the file or folder to be, which is also known as.
Answers: 3
You know the right answer?
Write a single 16-bit LC-3 instruction (in binary) that sets the condition code bits (N, Z, P) accor...
Questions
question
Mathematics, 06.05.2020 05:09
question
Chemistry, 06.05.2020 05:09
question
Mathematics, 06.05.2020 05:09
Questions on the website: 13722359