Consider two humanoids, one with and one without division hardware. Consider a program which involves 40% of the computations to be division, 20% multiplication and 40% the rest. The Pepper robotwith division hardware can perform division quite fast. The number of cycles for each class of instruction is: Division (8 cycles), multiply (6 cycles) and rest (4 cycles). The NAO robothas no division hardware and thus division mustbe implemented (by repeated subtraction) using software macros and thus requires 32 cycles. Both machines are operational at 10 GHZ. Find the MIPS ratings for each of the humanoids.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

Visually impaired individuals generally rely on the for navigation. thus, designers need to ensure that mouse-specific inputs, such as pointing, clicking, and hovering, can be done without a mouse.

In a heat transfer course, we can derive the equation for the temperature distribution in a flat rectangular plate. in this example, we will look at a plate at steadystate with three sides being held at t1, and one side held at t2. the temperature for any location on the plate, t(x,y), can be calculated by where create a function (prob3_5) that will take inputs of vectors x and y in feet, scalar n, scalars l and w in feet and scalars t1 and t2 in degrees fahrenheit. it will output a matrix t which is the temperature of each x and y locations. t will have the number of columns equal to the number of elements in x and rows equal to the number of elements in y. though this can be done without loops (perhaps more efficiently), your program must use a nested loop.