You have a single router connected to the Internet through its Serial0/0/0 interface. The router is used to create a screened subnet. Hosts accessible through the Fa0/0 interface are Internet hosts that should be able to be contacted by other hosts on the Internet. You would like to use NAT to translate the inside local address to an inside global address. Complete the following tasks: Configure the inside and outside NAT interfaces. Create static NAT mappings to map an inside local address to an inside global address as follows: Server Inside Local Address Inside Global Address Web server 192.168.1.2 20.11.15.65 DNS server 192.168.1.3 20.11.15.66 FTP server 192.168.1.4 20.11.15.67 Mail server 192.168.1.5 20.11.15.68 Save your changes.