subject
Engineering, 14.09.2019 01:30 povijuaisaiah

An electrical energy storage system is based on a 30 w pem fuel cell (mass 285 g, efficiency based on hhv of 50%) and a number of metal hydride hydrogen storage canisters each capable of storing up to 1.2 wt% hydrogen with an uncharged mass of 134 g (nb 100% includes mass of canister plus hydrogen here). at what minimum total electrical energy delivery capacity would this system have a system gravimetric energy density advantage over a battery bank based on a number of lithium polymer batteries, each weighing 88 g and rated at 1800 mah with a nominal voltage of 7.4 v? assume an 80% depth of discharge for each battery and a 12% drop in voltage, linear with usage, during discharge. consider just whole numbers of mh canisters and batteries. at the gravimetric energy density crossover point, how many mh canisters would the hydrogen fuel system employ and how many batteries (rounded to the nearest whole numbers)?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200ยฐc and outer surface temperature of the insulation to be 15ยฐc. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
An electrical energy storage system is based on a 30 w pem fuel cell (mass 285 g, efficiency based o...
Questions
question
Mathematics, 02.12.2019 08:31
question
English, 02.12.2019 08:31
question
History, 02.12.2019 08:31
Questions on the website: 13722359