subject
Engineering, 19.11.2019 06:31 jaystarr9395

Cryo-electron tomography uses an electron microscope to obtain remarkably high resolution images, such as those used to understand the structures in planctomycetes bacteria. however, earlier microscopic techniques also led to important discoveries. which of the examples below describes a bacterial characteristic discovered using microscopy? a. electron microscopy has been used to show that mycoplasmas lack cell walls. b. light microscopy with the gram-stain technique has been used to show that bacillus are gram-negative rods. c. electron microscopy has been used to identify the reticulate body in mycobacteria. d. light microscopy and the acid-fast staining technique can be used to distinguish clostridium from all other genera of bacteria.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
Cryo-electron tomography uses an electron microscope to obtain remarkably high resolution images, su...
Questions
question
English, 22.12.2021 19:30
Questions on the website: 13722360