subject
Engineering, 04.12.2019 21:31 stefani5519

It is desired to transport liquid metal through a pipe embedded in a wall at a point where the temperature is 650 k. a 1.2‐m‐thick wall constructed of a material having a thermal conductivity varying with temperature according to k = 0.0073 (1 + 0.0054 t), where t is in k and k is in w/m ⋅ k, has its inside surface maintained at 925 k. the outside surface is exposed to air at 300 k with a convective heat‐transfer coefficient of 23 w/m2 ⋅ k. how far from the hot surface should the pipe be located? what is the heat flux for the wall?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
You know the right answer?
It is desired to transport liquid metal through a pipe embedded in a wall at a point where the tempe...
Questions
question
Mathematics, 12.07.2019 01:00
question
History, 12.07.2019 01:00
Questions on the website: 13722359