Engineering, 12.02.2020 00:31 xchloee
The frame has an original loading system of four applied forces and one applied couple moment. Replace this loading system by an equivalent resultant force and couple moment acting at point B.
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12ยฐ, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
The frame has an original loading system of four applied forces and one applied couple moment. Repla...
Mathematics, 04.11.2019 05:31
English, 04.11.2019 05:31
Mathematics, 04.11.2019 05:31
Biology, 04.11.2019 05:31
Mathematics, 04.11.2019 05:31
Chemistry, 04.11.2019 05:31
Computers and Technology, 04.11.2019 05:31
Mathematics, 04.11.2019 05:31
Mathematics, 04.11.2019 05:31
Mathematics, 04.11.2019 05:31