subject
Engineering, 07.04.2020 00:19 paisley13

Identify the following statements as True or False?

1. Copper has a higher thermal conductivity than aluminum.
2. The density of copper is closer to that of aluminum than it is to iron.
3. Bronze alloys with more than 20 wt% tin are quite ductile and easily cold-worked compared to alloys with 5 wt% tin or less, because large additions of the soft metal tin enhance the ductility of copper.
4. Copper and its alloys form a green tarnish over time, consisting of sulfides and carbonates.
5. The electrical conductivity of somewhat impure copper alloys can actually be increased by introducing a small amount of oxygen into the copper, provided the oxygen reacts with impurities and coalesces them into larger oxide particles.
6. Copper is relatively resistant to corrosion by neutral and even mildly basic water.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
Identify the following statements as True or False?

1. Copper has a higher thermal cond...
Questions
question
Health, 24.06.2019 14:50
Questions on the website: 13722360