Engineering, 03.05.2020 13:54 lex112592
What is the purpose of structural components such as frames, bearings, and mounts? A.) Connect two rotating parts of a machine. B.) House, secure, and connect all parts to form one machine or tool. C. Provide power to the machine. D.) Transfer input energy from the power source throughout the machine.
Answers: 2
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
What is the purpose of structural components such as frames, bearings, and mounts? A.) Connect two r...
Mathematics, 22.07.2019 00:32
Computers and Technology, 22.07.2019 00:32
Health, 22.07.2019 00:32
Mathematics, 22.07.2019 00:32
History, 22.07.2019 00:32
Biology, 22.07.2019 00:32
Physics, 22.07.2019 00:32