Engineering, 28.11.2020 14:00 leo4687

A planar steam-water heat exchanger is on a 1.5 m2 heating surface and consists of a 5 mm thick copper plate (k=390 kcal/mhK) and an 8 mm thick nickel plate (k=70 kcal/MHK) adjacent to it. On the side of the copper plate there is steam at a temperature of 3200C, and limestone was formed due to deposits in the Steam. Due to Limestone, there is an additional thermal resistance of 0.005 m2hK/kcal against heat transfer. On the nickel side, there is water at a temperature of 400C. Heat transfer coefficients on the Steam and water side are 7000 and 600 kcal/m2hk. a) find the amount of heat passing, surface temperatures and intermediate temperatures Dec.
b) what would be the amount of heat passing if it wasn't for Limestone? In this case, what is the percentage of heat loss due to Limestone?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

You know the right answer?

A planar steam-water heat exchanger is on a 1.5 m2 heating surface and consists of a 5 mm thick copp...

Questions