subject
Engineering, 28.01.2021 07:20 genyjoannerubiera

A Sculpture that expresses:

(The theme)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
question
Engineering, 06.07.2019 04:10
An array of m-50 thermoelectric modules is installed on the exhaust of a sports car. each module has an effective seebeck coefficient of sp of 0.143 5vk and an internal electrical resistance of r.-4 ? in addition, : (15 points each module is of width w 60mm and contains n=100 pairs of semiconducting pellets. each pellet hasan overall length of 2l-5mm and a cross-sectional area as 1.2 x 10'm and is characterized by a thermal conductivity of kpl2w rnk. the hot side of each module is exposed to exhaust gases at·p650c with hia4ow rrk while the osite side of each module is cooled by pressurized water at surface) and 156 °c (at the cool surface). 11s c with h: -500w/m'k. the modules are wired n series and the load resistance is r d=400ohm .the module surface temperatures, t, and ts are 183 "c (at the hot surface and 156c (at the cool surface) a)-draw a schematic of this scenario and label all parts. a. b. if the induced current, i, is 0.15 amps, what is the total power (pa) for one module? c. what is the total power harvest from the exhaust with all 50 modules?
Answers: 2
question
Engineering, 06.07.2019 05:10
An ideal vapor-compression refrigeration cycle is employed to maintain a building temperature of 23°c when the outside temperature is 37°c. the cycle operates at steady state using ammonia as the working fluid. the mass flow rate of the refrigerant is 15 kg/min. the refrigerant enters the compressor at 1.5 bar and 10 °c. the condenser pressure is 20 bar and the temperature at the condenser exit is 45 °c. determine (a) the compressor power in kw. (b) the refrigeration capacity in tons. (c) the coefficient of performance. d) the maximum theoretical coefficient of performance.
Answers: 2
You know the right answer?
A Sculpture that expresses:

(The theme)...
Questions
question
Mathematics, 17.06.2020 02:57
question
Mathematics, 17.06.2020 02:57
question
Biology, 17.06.2020 02:57
question
Mathematics, 17.06.2020 02:57
question
Mathematics, 17.06.2020 02:57
Questions on the website: 13722361