subject
Engineering, 10.02.2021 17:50 izzygewin47821

Files A(n) __Fine__ file with large cutting edges should be used on soft materials, such as plastic, brass, and aluminum.
A(n) file with small cutting edges is needed to produce a smoother surface and to cut harder materials, like cast iron or steel.
List at least three safety rules that should be followed when working with a file.

Saws
What type of saw is used to cut metal objects?
Name at least two of the rules to remember when using a hacksaw.

Holding Tools
List the rules to follow when using a vise.
C-clamps .
A. come in many different sizes
B. can be used when cutting or welding
C. hold parts on a work surface
D. All of the above.
Name some of the types of stands or holding fixtures that can be used when servicing an automobile.

Cleaning Tools
Why is dirt considered a major enemy of a vehicle?
What type of cleaning tools should be used to remove carbon, grease, old gaskets, and dried oil from parts?
are used to remove light rust and dirt on parts.

Probe and Pickup Tools
What is the purpose of pickup tools?
A(n) probe will allow you to see an oil leak behind the engine.

Pry Bars
When are pry bars helpful during automotive servicing?
Why should you always use caution when using a pry bar during vehicle servicing?

Insulated Tools
What danger does an insulated tool protect an automotive technician against?
When working on the circuits of a hybrid vehicle, a technician should use only specifically designed insulated tools (rated at 1000 volts).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
You know the right answer?
Files A(n) __Fine__ file with large cutting edges should be used on soft materials, such as plasti...
Questions
question
English, 03.12.2021 22:50
Questions on the website: 13722360