Engineering, 20.02.2021 01:00 kromaug1517
Is the average run length performance of a control chart a more meaningful measure of performance than the type I and type II error probabilities? What information does ARL convey that the statistical error probabilities do not? Type I and II error probabilities contain information on statistical performance; an ARL results from their selection. ARL is more meaningful in the sense of the operations information that is conveyed and could be considered a measure of the process performance of the sampling plan.
Answers: 3
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Is the average run length performance of a control chart a more meaningful measure of performance th...
Mathematics, 16.11.2020 03:40
English, 16.11.2020 03:40
Social Studies, 16.11.2020 03:40
History, 16.11.2020 03:40
Advanced Placement (AP), 16.11.2020 03:40
English, 16.11.2020 03:40
English, 16.11.2020 03:40
Physics, 16.11.2020 03:40
Mathematics, 16.11.2020 03:40
Arts, 16.11.2020 03:40
Mathematics, 16.11.2020 03:40
History, 16.11.2020 03:40