Engineering, 11.07.2021 23:50 darkghostmist

) A hydraulically operated multidisk plate clutch has an effective disk outer diameter of 160 mm and an inner diameter of d mm. There are six sliding planes. The coefficient of friction (f) is 0.20 and the maximum pressure (Pa) is 900 kPa. (a) Using the uniform wear model, estimate the axial force.
(b) Calculate the inner diameter of the plates for maximum torque and determine the maximum Torque
(hint: differentiate torque T with respect to inner diameter of d).

) A hydraulically operated multidisk plate clutch has an effective disk outer diameter of 160 mm an

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

You know the right answer?

) A hydraulically operated multidisk plate clutch has an effective disk outer diameter of 160 mm and...

Questions