Discussion Topic Orthographic projection and isometric projection are two ways to show three-dimensional objects in a
two-dimensional space, such as on a piece of paper or a computer screen. Each method gives a
different perspective. Do some research and then compare and contrast the two methods for
displaying three-dimensional shapes. Then try your hand at creating both types of projections for a
simple geometric shape using paper, pencil, and a ruler.
In your opinion; what are the pros and cons of each projection? What are the limitations? In which
circumstances, environments, or occupations is one type of projection likely preferred over the other?
Describe any special tools that might be needed to create the projection. Which projection is easiest
for you to interpret visually? Why?

Orthographic Projection shows you the true size of the object, if you are drawing on 1:1 scale but Isometric Projection do not.

Orthographic Projection is used for making the projects but Isometric Projection is used to have better understanding of the object.

Orthographic drawings are typically two dimensional views of an object. For instance, if you were designing a table, you would draw a top view, side view and a bottom view. Should these three views not fully explain the design of the table other views would need to be drawn. When drawing an perspective view in an orthographic manner, you would utilize a 45 degree triangle for the lines that extend back or forward from the vertical lines. This type of perspective is not a true perspective because you can measure the true length of all the details shown.

An isometric drawing is meant to depict a 3D image of an object in what appears to be a perspective view. However, similar to an orthographic perspective, all of the lines in an isometric drawing can be measured to their true length. What makes it different from an orthographic perspective is that its angled lines are drawn at 30 or 60 degrees or divisions of them. Drawing this by hand you would use a 30/60/90 triangle.

In either case, both types of perspectives can be accurately measured with a ruler in order to know the objects measurements.

These principles are usually taught in a drafting class, but may be taught in advanced art as well. Orthographic views may be drawn out on a page to show top, front and side views of an isometric drawing that is also drawn on the page as well. This is a basic drafting design setup.

Step-by-step explanation:

add -60 to 120 which will result in : 2x+3y=180

then subtract 2x: 3y=-2x+180

lastly, divide by 2: y= -2/3x+60

hope this is the answer you're looking for: )