Physics, 07.10.2019 17:20 LEXIEXO

Afactory worker pushes a 30.0kg crate a distance of 4.4 m along a level floor at constant velocity by pushing downward at an angle of 31 below the horizontal. the coefficient of kinetic friction between the crate and floor is 0.24.

1-what magnitude of force must the worker apply to move the crate at constant velocity?
2-how much work is done on the crate by this force when the crate is pushed a distance of 4.4m?
3-how much work is done on the crate by friction during this displacement?
4-how much work is done by the normal force?
5-how much work is done by gravity?
6-what is the total work done on the crate?

Answers: 1

Show answers

Answers

Answer from: landenDfisher

1) F = 94.58 N , 2) W1 = 360.4 J , 3) W2 = -360.4 J , 4) W3 =0

Explanation:

1- To find the value of the force, let's use Newton's second law, where in the x-axis we have the applied force and the friction force that opposes the movement and the axis and we have the normal and the weight, look at the attached to see A free body diagram.

We see that the applied force (F) must be decomposed

Cos θ = Fx / F

Fx = f cos θ

sinθ = Fy / F

Fy = F sin θ

As the box moves at constant speed the acceleration is zero

X axis

Fx-fr 0 = 0

Fx = fr

fr = μ N

F cos T = μ N

Axis y

N -W- Fy = 0

N- F sin θ = mg

Let's write the equation system and solve it

F cos θ = μ N

N - F sin θ = mg

N = mg + F sinθ (1)

F cos θ = μ (mg + F sin θ)

F (cos θ - μ Sin θ) = μ mg

F (cos 30 - 0.24 sin 30) = 0.24 30.0 9.8

F = 70.56 / 0.746

F = 94.58 N

This is the value of the force applied

2- The work is defined as the scalar product of the force by the distance traveled, in this case as we have the components of the force the only one that performs work is the Enel X-axis component, because with the other the angle is 90º and the cosine of 90 is zero

W1 = Fx X

W1 = 94.58 cos 30 4.4

W1 = 360.4 J

3- Let's calculate the value of the friction force

fr = μ N

The value of normal can be found in equation 1

N = mg + F sin θ

N = 30.0 9.8 + 94.58 sin 30

N = 341.3 N

fr = 0.24 341.3

fr = 81.9 N

Now we can calculate the work, but let's look at the angle between the displacement and the friction force that is 180º so the cosine of 180 = -1

W2 = - fr X

W2 = - 81.9 4.4

W2 = -360.4 J

4- The normal one has a direction perpendicular to the displacement, so its angle is 90º and the cos 90 = 0, which implies that the work is zero

W3 =0

5- To calculate total work we just have to add the work of each force

W all = W1 + W2 + WN + Ww

W all = 360.4 + (- 360.4) + 0+ 0

W all = 0

Afactory worker pushes a 30.0kg crate a distance of 4.4 m along a level floor at constant velocity b

Answer from: Quest

conduction, convection, radiation

Answer from: Quest

Two cars collide, lock bumpers and move together after the collision.this collision is known as perfectly inelastic collision.

Another question on Physics

Physics, 22.06.2019 16:30

Which magnetic property best describes a magnet’s ability to act at a distance? magnets are dipolar. magnets attract only certain objects. magnets have magnetic fields. magnets can transfer their properties to certain materials.

Answers: 1

Answer

Physics, 22.06.2019 19:30

Point charges q1=+2.00μc and q2=−2.00μc are placed at adjacent corners of a square for which the length of each side is 1.50 cm . point a is at the center of the square, and point b is at the empty corner closest to q2. take the electric potential to be zero at a distance far from both charges. part a what is the electric potential at point a due to q1 and q2? express your answer with the appropriate units.

Answers: 2

Answer

Physics, 23.06.2019 09:00

Momentum lab this lab uses a phet simulation. navigate to the phet momentum simulation. if you don’t see the image below when you click on the link, then you need to either enable adobe flash (click on the puzzle piece on your screen) or you need to install adobe flash (this is a free program). change the vectors to be momentum vectors only. they are yellow. make the mass of both balls the same. hit play and notice what happens to the momentum vectors before and after the collision. you might want to play the sim multiple times. click on restart or return balls to start over. to see numbers, check the show values box (inside the green box). red’s momentum vector before the collision is green’s momentum vector after the collision. question 1 options: shorter than longer than equal to question 2 (1 point) saved since green bounces off red, this must be an collision. question 2 options: explosion inelastic elastic question 3 (1 point) red transfers of its momentum to green during the collision. question 3 options: little all most none question 4 (4 points) why does red transfer all its momentum to green? back up your answer with information from the simulation. write at least 2 sentences.

Answers: 1

Answer

Physics, 23.06.2019 09:30

One historical reason that people in the indian subcontinent have been reluctant to use livestock for food has been that a. their digestive systems are unable to handle meat and proteins b. they refused to eat meat in order to show resistance to british imperialism c. they are able to use cattle as a labor mainstay of their agriculture d. they can use the meat from cattle as fertilizer to make crops grow better

Answers: 1

Answer

You know the right answer?

Afactory worker pushes a 30.0kg crate a distance of 4.4 m along a level floor at constant velocity b...

Questions