The stopping distance of a vehicle is an important safety feature. assuming a constant braking force is applied, use the work-energy theorem to show that a vehicles stopping distance is proportional to the square of its initial speed. if an automobile traveling at 45 km/h is brought to a stop in 50 m, what would be the stopping distance for an initial speed of 90 km/h?

The stopping distance would be 200 m.

Explanation:

Hi there!

The work done to stop the vehicle is equal to its change in kinetic energy.

The equation of kinetic energy is the following:

KE = 1/2 · m · v²

Where:

KE = kinetic energy.

m = mass.

v = velocity.

The change in kinetic energy is calculated as follows:

ΔKE = final kinetic energy - initial kinetic energy

In this case, the vehicle is brought to stop, so, the final kinetic energy will be zero.

ΔKE = 0 - 1/2 · m · v²

The work done is calculated as follows:

W = F · d

Where:

W = work done

F = applied force

d = traveled distance (stopping distance in this case)

The force F is calculated as follows:

F = m · a

Where:

m = mass

a = acceleration

Then:

W = ΔKE

F · d = -1/2 · m · v²

m · a · d = -1/2 · m · v²

a · d = -1/2 · v²

d = -1/2 · v² / a

Let´s find the acceleration of the vehicle that is brought to stop in 50 m with an initial velocity of 45 km/h.

Let´s convert 45 and 90 km/h into m/s

45 km/h · 1000 m/ 1 km · 1 h /3600 s = 12.5 m/s

90 km/h · 1000 m/ 1 km · 1 h /3600 s = 25 m/s

The distance and velocity of the vehicle is calculated using the following equations:

x = x0 + v0 · t + 1/2 · a · t²

v = v0 + a · t

Where:

x = traveled distance at time t.

x0 = initial position.

v0 = initial velocity.

t = time.

a = acceleration.

v = velocity at time t.

Let´s place the origin of the frame of reference at the point where the vehicle begins to decelerate so that x0 = 0. When the vehicle stops, its velocity is zero. Let´s use the equation of velocity to find the time it takes the vehicle to stop (and travel a distance of 50 m):

v = v0 + a · t

0 = 12.5 m/s + a · t

-12.5 m/s / t = a

Using the equation of traveled distance, let´s find the time it takes the vehicle to travel 50 m until stop:

x = x0 + v0 · t + 1/2 · a · t²

Replacing a = -12.5 m/s / t

50 m = 12.5 m/s · t + 1/2 · (-12.5 m/s/t) · t²

50 m = 12.5 m/s · t - 6.25 m/s · t

50 m = 6.25 m/s · t

50 m/ 6.25 m/s = t

t = 8.0 s.

Then, the acceleration is the following:

-12.5 m/s / t = a

-12.5 m/s / 8 s = a

a = -1.5625 m/s²

Then, the stopping distance of the vehicle if it travels at an initial speed of 90 km/h would be the following:

d = -1/2 · v² / a

d = -1/2 ·(25 m/s)² / -1.5625 m/s²

d = 200 m

The stopping distance would be 200 m.

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia