Which argument best explains the charge of an atomic nucleus?

an atomic nucleus is positively charged because it is composed of neutrons.
an atomic nucleus is positively charged because it is composed of protons.
an atomic nucleus is negatively charged because it is composed of electrons.
an atomic nucleus is negatively charged because it is composed of neutrons.

An atom refers to a smallest, indivisible unit that comprises the matter that forms all chemical elements. Therefore, atoms are typically considered as the fundamental building blocks of matter which determines the structure of a chemical element.

Generally, an atom comprises three (3) distinct particles and these are;

Protons refers to the positively charged subatomic particles of a chemical element and an atomic nucleus.

On the other hand, electrons are the negatively charged subatomic particles of a chemical element with a magnitude of -1.

From the above definition, we can deduce that an atomic nucleus which is composed of protons is positively charged.

Find more information: link

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).