subject
Physics, 21.02.2020 19:24 elijahedgar876

Assume 40% of the input electricity power is wasted as heat in an incandescent light bulb. (This value is higher in real life, but we will use this estimate.)
1. If you have 10 incandescent bulbs in your apartment, calculate the energy wasted as heat per week. (Each bulb is 75 W (J/s), and your lighting duration is 6 hours per day.)

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 00:40
Electroplating is a way to coat a complex metal object with a very thin (and hence inexpensive) layer of a precious metal, such as silver or gold. in essence the metal object is made the cathode of an electrolytic cell in which the precious metal cations are dissolved in aqueous solution. suppose a current of 480.ma is passed through an electroplating cell with an aqueous solution of agno3 in the cathode compartment for 46.0 seconds. calculate the mass of pure silver deposited on a metal object made into the cathode of the cell. round your answer to 3 significant digits. also, be sure your answer contains a unit symbol. ×10μ
Answers: 3
question
Physics, 22.06.2019 15:00
Amoving company collects data about couches they move and displays the data in a table. the force along the ramp, the angle of the ramp, and the height the couch is raised to are shown. which statements correctly compare the work done to move the couches? check all that apply. the same amount of work is done for couches 1 and 3. the same amount of work is done for couches 2 and 3. the work for couch 1 is greater than the work for couch 2. the work for couch 2 is less than the work for couch 3. the work for couch 3 is greater than the work for couch 1. the work for couch 2 is greater than the work for couch 1.
Answers: 1
question
Physics, 22.06.2019 19:00
Ahorizontal force of 400.0 n is required to pull a 1760 n truck across the floor at a constant speed. find the coefficient of sliding friction.
Answers: 1
question
Physics, 22.06.2019 19:40
It may seem strange that the selected velocity does not depend on either the mass or the charge of the particle. (for example, would the velocity of a neutral particle be selected by passage through this device? ) the explanation of this is that the mass and the charge control the resolution of the device--particles with the wrong velocity will be accelerated away from the straight line and will not pass through the exit slit. if the acceleration depends strongly on the velocity, then particles with just slightly wrong velocities will feel a substantial transverse acceleration and will not exit the selector. because the acc
Answers: 1
You know the right answer?
Assume 40% of the input electricity power is wasted as heat in an incandescent light bulb. (This val...
Questions
question
Chemistry, 13.10.2020 14:01
question
Computers and Technology, 13.10.2020 14:01
Questions on the website: 13722363