subject
Physics, 11.03.2020 21:50 liyahhhbandz

A wire 5.20 m long and 6.22 mm in diameter has a resistance of 16.9 mΩ. A potential difference of 26.1 V is applied between the ends. (a) What is the current in amperes in the wire? (b) What is the magnitude of the current density? (c) Calculate the resistivity of the material of which the wire is made.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 20:20
Suppose that a comet that was seen in 563 a.d. by chinese astronomers was spotted again in year 1951. assume the time between observations is the period of the comet and take its eccentricity as 0.986. what are (a) the semimajor axis of the comet's orbit and (b) its greatest distance from the sun?
Answers: 1
question
Physics, 21.06.2019 22:00
In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?
Answers: 2
question
Physics, 22.06.2019 00:30
In positive numbers less than 1, the zeros between the decimal point and non zero are significant
Answers: 2
question
Physics, 23.06.2019 01:00
First answer marked as brainiest which is the correct equation describing the first law of thermodynamics? a) when the internal energy of a system changes, it equals the amount of heat added plus the work done. b) when work is done by the piston, it is equal to the heat added plus the change in internal energy of the system. c) when heat is added to the system, it is equal to the amount of work done by the piston plus the change in internal energy of the system.
Answers: 2
You know the right answer?
A wire 5.20 m long and 6.22 mm in diameter has a resistance of 16.9 mΩ. A potential difference of 26...
Questions
Questions on the website: 13722359