Physics, 26.11.2020 19:50 joho38

Use V = IR to predict values in electric circuit investigations.

Answers: 2

Show answers

Answers

Answer from: Quest

air exerts forces on falling objects near earth’s surface.

explanation:

the term 'free falls' refer to object that are falling towards the earth, in a situation in which gravity is the only force acting on the object.

for an object in free fall, the acceleration is constant (g, the gravitational acceleration), and so the velocity of the object constantly increases.

for objects near earth's surface, there is always another force acting on the object: the resistance due to the air. this force is opposed to the direction of fall of the object, and it is proportional to the velocity of the object, so as the object falls down, this force increases up to a point when it balances the force of gravity, and the object continues its motion at constant velocity (called terminal velocity). since in this case gravity is not the only force acting on the object, we are not in a situation of free fall.

Answer from: Quest

speed of light in vacuum is 300,000 km/s

speed of light in other mediums is given by the expression v = c/n, where c is the speed of light in vacuum and n is the refractive index of medium.

for the first medium v = 200,000 km/s

so, refractive index of medium = 300000/200000 = 1.5

1.5 refractive index is usually for glass. so first medium is glass.

for the second medium v = 250,00 km/s

so, refractive index of medium = 300000/250000 = 1.2

1.2 refractive index is usually for water. so second medium is water.

for the third medium v = 0 km/s

so, refractive index of medium = 300000/0 = ∞

∞ refractive index is usually for opaque mediums. so third medium is opaque medium.

Answer from: Quest

when jerome paddle in flowing river towards east the net speed of jerome will increase

so the net speed of jerome will be given as

$v_j = v_1 + v_2 = 3.100 + 1.350 = 4.45 m/s$

now the speed of paul will be same as it is given as he is running on the ground

$v_p = 3.100 m/s$

so here we can say since the speed of jerome is more so he will win the race

now as we know the distance so the time difference is given as

$\delta t = \frac{d}{v_j} - \frac{d}{v_p}$

$\delta t = \frac{2080}{4.450} - \frac{2080}{3.100}$

$\delta t = -203.55 s$

so jerome will reach first and the time difference will be 203.55 s or 3.4 min

Answer from: Quest

The answer would be a

Another question on Physics

Physics, 22.06.2019 12:20

Which lists the pairs of plates in order from least to greatest in terms of the work done to move the electron?

Answers: 2

Answer

Physics, 22.06.2019 12:30

What is the power rating of the lightbulb if 3.0 a flow through it when connected to a 15 v battery

Answers: 1

Answer

Physics, 22.06.2019 13:40

Consider a double atwood machine constructed as follows: a mass 4m is suspended from a string that passes over a massless pulley on frictionless bearings. the other end of this string supports a second similar pulley, over which passes a second string supporting a mass of 3m at one end and m at the other. using two suitable generalized coordinates, set up the lagrangian and use the lagrange equations to find the acceleration of the mass 4m when the system is released. explain why the top pulley rotates even though it carries equal weights on each side.

Answers: 2

Answer

Physics, 22.06.2019 15:00

Consider a uniformly charged ring in the xy plane, centered at the origin. the ring has radius a and positive charge qdistributed evenly along its circumference. a)what is the direction of the electric field at any point on the z axis? . b)what is the magnitude of the electric field along the positive z axis? use k in your answer, where k=14πϵ0. d)the ball will oscillate along the z axis between z=d and z=−d in simple harmonic motion. what will be the angular frequency ω of these oscillations? use the approximation d≪a to simplify your calculation; that is, assume that d2+a2≈a2. express your answer in terms of given charges, dimensions, and constants

Answers: 2

Answer

You know the right answer?

Use V = IR to predict values in electric circuit investigations....

Questions