Physics, 08.03.2021 19:50 bri2008

As a part of a project to construct a Rube Goldberg machine, a student wishes to construct a spring-loaded cube launcher. For examples of Rube Goldberg machines, see the beautiful Cog video or the Mythbusters Happy Holidays Rube Machine. Our student plans to trigger the release of the spring with a falling ball. The small cube to be launched has a mass of 119.0 grams. The available spring is a very stiff but light spring that has a spring constant of 461.0 N/m (the spring is so light that it may be considered massless). The spring will be mounted at the bottom of a wooden ramp which makes an angle of 50.0 degrees with the horizontal; the length of the spring is parallel to the ramp with the lower end of the spring fixed in place. For simplicity, assume that the part of the wooden ramp which is underneath the spring is highly polished and very slick; you may assume no friction on the cube by the ramp when the cube is moving on this portion of the ramp. For the rest of the wooden ramp, the coefficients of friction between the ramp surface and the cube surface are 0.590 for static friction and 0.470 for kinetic friction. Measured from the equilibrium position of the free end of the mounted spring, the distance to the top of the ramp is 17.0 cm (this is measured along the ramp) The plan is to compress the spring and maintain the compression with a simple trigger, which will be released by a falling ball. The cube will be at rest on the free end of the compressed spring. When the trigger is released, the spring will expand, shooting the cube up the ramp. The desired speed for the cube when it reaches the top of the ramp (where the cube will leave the ramp as a projectile to continue the Rube Goldberg sequence) is 45.0 cm/s. Your ultimate task will be to calculate the necessary amount of compression for the spring. The Spring is Compressed by 5.90 cm Before attempting the ultimate task, answer the following questions (Parts A-B) for the case in which the spring is compressed by 5.90 cm and then released, shooting the cube up the ramp and into the air. A) Find the work done on the cube by the spring during the time that the cube is in contact with the spring.
B) What is the speed of the cube at the the instant just before the sliding cube leaves the ramp?

Answers: 1

Show answers

Answers

Answer from: kumoichie

1. The work done on the cube during the time the cube is in contact with the spring is 0.8023705 J

2. The speed of the cube at the instant just before the sliding cube leaves the ramp is approximately 31.5 cm/s

Explanation:

The given parameters of the Rube Goldberg machine are;

The distance from the free end of the spring to the top of the ramp, d = 17.0 cm = 0.17 m

The mass of the small cube to be launched, m = 119.0 g = 0.119 kg

The spring constant of the spring, k = 461.0 N/m

The angle of elevation of the ramp to the horizontal, θ = 50.0°

The coefficient of static friction of the wood, $\mu_s$ = 0.590

The coefficient of dynamic friction of the wood, $\mu_k$ = 0.470

The velocity of the cube at the top of the ramp, v = 45.0 cm/s = 0.45 m/s

The amount by which the cube is compressed, x = 5.90 cm = 0.059 m

The work done on the cube during the time the cube is in contact with the spring = The energy of the spring, E = (1/2)·k·x²

∴ E = (1/2) × 461.0 N/m × (0.059 m)² = 0.8023705 J

The work done on the cube during the time the cube is in contact with the spring= E = 0.8023705 J

2. The frictional force, F_f = $\mu_k$ ·m·g·cos(θ)

∴ F_f = 0.470 × 0.119 × 9.8 × cos(50) ≈ 0.35232 N

The work loss to friction, W = F_f × d

∴ W = 0.35232 N × 0.17 m ≈ 0.05989 J

The work lost to friction, W ≈ 0.05989 J

The potential energy of the cube at the top of the ramp, P.E. = m·g·h

∴ P.E. = 0.119 kg × 9.8 m/s² × 0.17 m × sin(50°) ≈ 0.151871375 J

By conservation of energy principle, the Kinetic Energy of the cube at the top of the ramp, K.E. = E - W - P.E.

∴ K.E. = 0.8023705 J - 0.05989 J - 0.151871375 J ≈ 0.590609125 J

K.E. = (1/2)·m·v²

Where;

v = The speed of the cube at the instant just before the sliding cube leaves the ramp

∴ K.E. = (1/2) × 0.119 kg × v² ≈ 0.590609125 J

v² ≈ 0.590609125 J/((1/2) × 0.119 kg) ≈ 9.92620378 m²/s²

v = √(9.92620378 m²/s²) ≈ 3.15058785 m/s ≈ 31.5 cm/s

The speed of the cube at the instant just before the sliding cube leaves the ramp, v ≈ 31.5 cm/s.

Answer from: Quest

what do the notation's look like?

Answer from: Quest

when the use of electricity burdens the fuse and miniarure circuit beakers and there is a possibility of a fuse then they automatically cut off the electricity supply to your homes and after you fix the problem u jzt switch it on and it continues the supply of electricity to ur homes

Another question on Physics

Physics, 22.06.2019 00:10

I'm kinda lost ! 1. when marilyn takes her pet dog for a walk, the dog walks at a veryconsistent pace of 0.55 m/s. draw a position-time graph to representmarilyn's dog walking the 19.8 m distance from the front of her house tothe nearest fire hydrant.2. both car a and car bleave school when a stopwatch reads zero. car atravels at a constant 75 km/h, and car b travels at a constant 85 km/h.a) draw a position-time graph showing the motion of both cars. howfar are the two cars from school when the stopwatch reads 2 hrs? calculate the distances and show them on your graph.b) both cars passed a gas station 120 km from the school. when dideach car pass the gas station? calculate the times and show themon your graph.3. the figure below shows the position-time graph showing a shopper'smovement up and down the aisle at a store.a) write a story describing the shopper's movements at the store.b) when does the shopper have a position of 6 m? c) how much time passes between when the shopper enters the aisleand when he gets to a position of 12 m? what is the shopper's averagevelocity between 37 s and 46 s?

Answers: 3

Answer

Physics, 22.06.2019 04:00

All the simple machines make work easier to do by changing the or of a force. a. size; type b. work; type c. size; direction d. type; direction

Answers: 2

Answer

Physics, 22.06.2019 10:00

Abookcase has a mass of 38 kg and the coefficient of friction between it and the floor is 0.82 what is the maximum force of friction between the bookcase and the floor a 372n b 305n c 412n d 449n

Answers: 1

Answer

Physics, 22.06.2019 14:10

What is the weight of a 8-kg substance in n, kn, kg·m/s2, kgf, lbm·ft/s2, and lbf?

Answers: 2

Answer

You know the right answer?

As a part of a project to construct a Rube Goldberg machine, a student wishes to construct a spring-...

Questions