36)
The chemical composition of a residual soil in a certain area
is determined by the
...
36)
The chemical composition of a residual soil in a certain area
is determined by the
A) method by which the soil was transported to the area
B) slope of the land and the particle size of the soil
C) minerals in the bedrock beneath the soil and the climate
of the area
D) length of time since the last crustal movement in the
area occurred
Answers: 1
Physics, 21.06.2019 19:40
Abird sitting high in a tree is an example of what type of wnergy
Answers: 2
Physics, 22.06.2019 02:50
20. threshold braking in the vehicle's braking system occurs when a. the brake pedal is pushed, heel on floorboard, with full foot pressure. b. the brakes are exerting full braking power, without traction loss. c. the driver begins pushing down the brake pedal, with moderate slowdown. d. the brakes just begin to take hold with a gradual slowdown.
Answers: 3
Physics, 22.06.2019 06:20
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
Physics, 22.06.2019 06:40
Determine the change in width a, height b, thickness t when a plate is subjected to the uniform distributed load and is made of material having modulus of elasticity e=230 gpa and poisson's ratio ν=1/3. given : a=400 mm and b= 300 mm also the uniformly distributed load in downward y direction of plate is 2 mn/m and in the positive x direction is 3 mn/m and t=20 mm
Answers: 1
Mathematics, 11.06.2020 00:57
Mathematics, 11.06.2020 00:57
Mathematics, 11.06.2020 00:57
Mathematics, 11.06.2020 00:57
Mathematics, 11.06.2020 00:57
Mathematics, 11.06.2020 00:57