Identify the distance labeled from A to B. Explain what could be done to the note played on an instrument to change that distance. A) B) From A to B is known as the wavelength and changing the pitch of the note will change its length. From A to B is known as the amplitude and changing the loudness of the note will change its length. From A to B is known as the wavelength and changing the amplitude of the note will change its length. From A to B is known as the wave height and changing the amplitude of the note will change its length. D)​

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

A26 cm object is 18 cm in front of a plane mirror. a ray of light strikes the object and is reflected off the mirror at a 42-degree angle. what is the angle of reflection? degrees what type of image is formed? what is the size of the image? cm

Why does the equilibrium position of the spring change when a mass is added to the spring? will the mass oscillate around the new equilibrium position of the spring or the previous position without a mass attached to the spring? if the equilibrium position of the spring changes by 20 cm (assuming no initial mass) when a mass is added to the spring with constant 4.9 kg/s^2, what is the mass of the object attached to the spring?