PLEASE HELP! In the diagram, q1=+6.39x10^-9 C and q2=+3.22*10^-9 C. What is the electric field at point P?! I need this ASAP

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

What are igneous intrusions and extrusions

Balloon a has charge q, and identical mass balloon b has charge 10q. you hang them from threads near each other. choose all of the statements with which you agree. check all that apply. a. a and b exert the same magnitude forces on each other. b. the force that a exerts on b is 10 times the force that b exerts on a. c. the angle between the thread supporting a and the vertical is < the angle between the thread supporting b and the vertical. d. the force that a exerts on b is 1/10 the force that b exerts on a.