The vehicles needing to be unloaded are ...

Explanation:

This guidance should be followed to help avoid problems.

Guidance

Loading and unloading areas should be:

Clear of other traffic, pedestrians and people not involved in loading or unloading.

Clear of overhead electric cables so there is no chance touching them, or of electricity jumping to 'earth' through machinery, loads or people.

Level. To maintain stability, trailers should be parked on firm level ground,

Loads should be spread as evenly as possible, during both loading and unloading. Uneven loads can make the vehicle or trailer unstable.

Loads should be secured, or arranged so that they do not slide around. Racking may help stability.

Safety equipment must be considered. Mechanical equipment and heavy moving loads are dangerous.

Guards or skirting plates may be necessary if there is a risk of anything being caught in machinery (for example dock levellers or vehicle tail lifts). There may be other mechanical dangers and safety procedures to be considered.

Ensure the vehicle or trailer has its brakes applied and all stabilisers are used. The vehicle should be as stable as possible.

In some workplaces it may be possible to install a harness system to protect people working at height. Provide a safe place where drivers can wait if they are not involved. Drivers should not remain in their cabs if this can be avoided. No-one should be in the loading/unloading area if they are not needed.

Vehicles must never be overloaded. Overloaded vehicles can become unstable, difficult to steer or be less able to brake.

Always check the floor or deck of the loading area before loading to make sure it is safe. Look out for debris, broken boarding, etc.

Loading should allow for safe unloading.

Loads must be suitably packaged. When pallets are used, the driver needs to check that:

They are in good condition

Loads are properly secured to them.

Loads are safe on the vehicle. They may need to be securely attached to make sure they cannot fall off.

Tailgates and sideboards must be closed when possible. If over-hang cannot be avoided, it must be kept to a minimum. The over-hanging part of the load must be clearly marked.

If more than one company is involved, they should agree in advance how loading and unloading will happen.

For example, if visiting drivers unload their vehicles themselves, they must receive the necessary instructions, equipment and co-operation for safe unloading. Arrangements will need to be agreed in advance between the haulier and the recipient.

Some goods are difficult to secure during transport. Hauliers and recipients will need to exchange information about loads in advance so that they can agree safe unloading procedures.

Checks must be made before unloading to make sure loads have not shifted during transit, and are not likely to move or fall when restraints are removed.

There must be safeguards against drivers accidentally driving away too early. This does happen, and is extremely dangerous. Measures could include:

liverpool, trent alexander arnold

explanation:

the correct answer is d