If a defibrillator manufacturer claims that its device terminates ventricular fibrillation on the first shock 95% of the time, you should: Select one:

a. purchase the device based solely on the manufacturer's claim.
b. recognize that this does not mean the device will save more lives.
c. avoid purchasing the device because this claim is unrealistic.
d. determine which device the American Heart Association suggests.

B. recognize that this does not mean it will save more lives.

Explanation: If a defibrillator manufacturer claims that its device terminates ventricular fibrillation on the first shock 95% of the time, one should recognize that it does not mean that the defibrillator will save more lives probably from cutting the amount of time spent in defibrillation. It simply tells you that you can be 95% confident that the device would terminate ventricular fibrillation on the first shock or that there is a smaller chance of the device not performing as stated. As such, it is a measure of the degree of confidence. When purchasing the said device, purchase should not be carried out solely on the manufacturer's claim.

sound is invisible, but sometimes we can feel it. when a kettle-drum is thumped with a stick that time the tight drum skin moving up and down very quickly for some time and then it pumped sound waves into the air. loudspeakers also work in a similar manner.

components of a speaker:

electromagnet

in order to translate an electrical signal into an audible sound, an electromagnet is used in looudspeakers

  suspension

suspension is used to   center the voice coil in the gap of the magnet and it exerts a restoring force to keep it there. suspension is used to limits the maximum mechanical excursion of the diaphragm and voice coil.

voice coil

voice coil is a coil of wire which is attached to the apex of a loudspeaker cone. it provides the motive force to the cone by the reaction of a magnetic field to the current passing through it.

cone

in a   loudspeaker, a   thin, semi-rigid membrane attached to the voice coil, which moves in a magnetic gap due to which it vibrates   and produced sound. it is known as diaphragm and it can also be called a cone, though not all speaker diaphragms are cone-shaped.

surround

surround is also known as front suspension. surround is used to join the cone to the chassis. together with the suspension it controls the cone excursion, and it is also used to   determine how energy which is   travelling through the cone is absorbed, and how the speaker limits when it reaches the ends of its travel.

dustcap

dustcap is used to protect the voice coil from dust and dirt. it is a part of the cone.

how speaker work

the outer part of the cone is fastened to the outer part of the loudspeaker's circular metal rim. the inner part is fixed to   voice coil that sits just in front of a permanent magnet . when loudspeaker is hooked up to a stereo, electrical signals feed through the speaker cables into the coil. it will convert the coil into an electromagnet magnet . when electricity flows back and forth in the cables, the electromagnet either repels or attract the permanent magnet. this moves the coil back and forth, and it pull and push the loudspeaker cone. like a drum skin vibrating back and forth, the moving cone pumps sounds out into the air.in this way loudspeakers works.

the answer is "b.the increased supply will create a surplus. "

the essential thought behind price controls is straightforward - utilize the power of law to modify the equilibrium of a market. for instance, the legislature may choose that the steel business needs to survive, and in this way pass a law to set a value floor on steel. this implies all steel sold must offer at or over the floor value, which must be set over the equilibrium cost for it to have any impact. the switch could likewise happen - the administration can choose that steel is excessively costly and set a value roof underneath its equilibrium value, with the goal that all steel must be sold at or beneath that ceiling.