You are driving on a multi-lane road or highway, and are approaching an emergency vehicle
parked along the roadway with its emergency lights activated. If you are in the lane closest to
the emergency vehicle, you must
A: Stay in your lane and obey the speed limit.
B: Pullover onto the shoulder immediately
C: Safely leave the lone closest to the emergency vehicle, or slow down to a speed 20 miles per
hour below the posted speed limit.

C. Safely leave the lane closest to the emergency vehicle, or slow down to a speed 20 miles per hour below the posted speed limit.

Explanation:

When driving either on the high way or within the street, it is expected that one take note of the activities around him and also follow strictly driving rules and road signs . This is necessary inorder to avoid causing accident to oneself or other road users and or pay fines as a result of not following laid down driving rules and road signs.

With regards to the above scenario, the driver must either leave the lane closest to the emergency vehicle as he approaches the place or slow down to the required speed so as to prevent colliding with the emergency vehicle or causing accident to other road users and people working around the area .

sound is invisible, but sometimes we can feel it. when a kettle-drum is thumped with a stick that time the tight drum skin moving up and down very quickly for some time and then it pumped sound waves into the air. loudspeakers also work in a similar manner.

components of a speaker:

electromagnet

in order to translate an electrical signal into an audible sound, an electromagnet is used in looudspeakers

  suspension

suspension is used to   center the voice coil in the gap of the magnet and it exerts a restoring force to keep it there. suspension is used to limits the maximum mechanical excursion of the diaphragm and voice coil.

voice coil

voice coil is a coil of wire which is attached to the apex of a loudspeaker cone. it provides the motive force to the cone by the reaction of a magnetic field to the current passing through it.

cone

in a   loudspeaker, a   thin, semi-rigid membrane attached to the voice coil, which moves in a magnetic gap due to which it vibrates   and produced sound. it is known as diaphragm and it can also be called a cone, though not all speaker diaphragms are cone-shaped.

surround

surround is also known as front suspension. surround is used to join the cone to the chassis. together with the suspension it controls the cone excursion, and it is also used to   determine how energy which is   travelling through the cone is absorbed, and how the speaker limits when it reaches the ends of its travel.

dustcap

dustcap is used to protect the voice coil from dust and dirt. it is a part of the cone.

how speaker work

the outer part of the cone is fastened to the outer part of the loudspeaker's circular metal rim. the inner part is fixed to   voice coil that sits just in front of a permanent magnet . when loudspeaker is hooked up to a stereo, electrical signals feed through the speaker cables into the coil. it will convert the coil into an electromagnet magnet . when electricity flows back and forth in the cables, the electromagnet either repels or attract the permanent magnet. this moves the coil back and forth, and it pull and push the loudspeaker cone. like a drum skin vibrating back and forth, the moving cone pumps sounds out into the air.in this way loudspeakers works.