subject
Business, 09.07.2021 21:20 baby851

Diving Fiasco. Mike, who owns a dive shop in the United States, decides to take a group of his customers diving in U. S. waters. Mike is aware that sharks occasionally visit the area where the divers will be visiting. He is also aware that, while stingrays are usually tame, they can become aggressive when fed. Mike does not reveal that information to the group of divers going with him. The divers go down into the water, and some have squid with which to feed the stingrays. During the dive, one of the stingrays becomes agitated and latches onto diver Susie's arm. Susie is so disconcerted that she drops her regulator (her breathing device) from her mouth and is in considerable difficulty. Another diver, Billy, encounters a shark, which snaps at him. While the shark does not actually bite Billy, the attack results in damage to his diving equipment. Mike, who is in charge of the dive, does nothing to help and leaves the other divers to return to the boat because the dive turned out to be more trouble than expected. Wendy, another diver on the trip, also returns to the boat without doing anything to help the divers in distress. Sam, on the other hand, goes to rescue the divers who are in distress. He manages to do so but in the process he pulls his back and requires medical care. All divers are very unhappy with Mike. Which of the following is true regarding whether Wendy and Sam had a duty to come to the assistance of the divers in peril? A. Neither Wendy nor Sam had a duty to aid the divers in peril.
B. Wendy and Sam had a duty to aid the divers in peril, but only if Mike refused to do so.
C. Wendy and Sam did not have a duty to aid the divers in peril, unless they were the first to observe the problem. Wendy and Sam had a duty to aid the divers in peril, but only if they were acquainted with them before the dive.
D. Wendy and Sam had no duty to help strangers. Wendy and Sam had a duty to aid the divers in peril if personal safety was involved, but not O if the only issue was damage to property

ansver
Answers: 1

Another question on Business

question
Business, 21.06.2019 20:20
Jimmy owns an ice cream parlor. he designs a schedule for the different tasks the employees have to perform in order to prevent monotony at work. according to the schedule, if an employee makes waffle cones on a day, he serves ice creams the next day and clears the tables on the day after that. jimmy is using the approach at his ice cream parlor.
Answers: 2
question
Business, 22.06.2019 05:00
What is free trade? a. trade that is not subject to taxes or fees b. trade that governments do not interfere with c. trade with a high level of government regulation d. trade between states in the u.s. b
Answers: 1
question
Business, 22.06.2019 06:20
About time delivery co. incurred the following costs related to trucks and vans used in operating its delivery service: classify each of the costs as a capital expenditure or a revenue expenditure. 1. changed the oil and greased the joints of all the trucks and vans. 2. changed the radiator fluid on a truck that had been in service for the past four years. 3. installed a hydraulic lift to a van. 4. installed security systems on four of the newer trucks. 5. overhaul the engine on one of the trucks purchased three years ago. 6. rebuilt the transmission on one of the vans that had been driven 40,000 miles. the van was no longer under warranty. 7. removed a two-way radio from one of the trucks and installed a new radio with a greater range of communication. 8. repaired a flat tire on one of the vans. 9. replaced a truck's suspension system with a new suspension system that allows for the delivery of heavier loads. 10. tinted the back and side windows of one of the vans to discourage theft of contents.
Answers: 1
question
Business, 22.06.2019 10:50
You are evaluating two different silicon wafer milling machines. the techron i costs $285,000, has a three-year life, and has pretax operating costs of $78,000 per year. the techron ii costs $495,000, has a five-year life, and has pretax operating costs of $45,000 per year. for both milling machines, use straight-line depreciation to zero over the project’s life and assume a salvage value of $55,000. if your tax rate is 24 percent and your discount rate is 11 percent, compute the eac for both machines.
Answers: 3
You know the right answer?
Diving Fiasco. Mike, who owns a dive shop in the United States, decides to take a group of his custo...
Questions
question
Mathematics, 21.08.2020 14:01
question
Mathematics, 21.08.2020 14:01
question
Advanced Placement (AP), 21.08.2020 14:01
question
Spanish, 21.08.2020 14:01
Questions on the website: 13722360