Business, 30.01.2022 06:20 rivasalejandro854

The organization for economic cooperation and development is an example of which type of initiative that strives to slow the pace of bribery and corruption?.

Answers: 1

Show answers

Answers

Answer from: Quest

sound is invisible, but sometimes we can feel it. when a kettle-drum is thumped with a stick that time the tight drum skin moving up and down very quickly for some time and then it pumped sound waves into the air. loudspeakers also work in a similar manner.

components of a speaker:

electromagnet

in order to translate an electrical signal into an audible sound, an electromagnet is used in looudspeakers

suspension

suspension is used to center the voice coil in the gap of the magnet and it exerts a restoring force to keep it there. suspension is used to limits the maximum mechanical excursion of the diaphragm and voice coil.

voice coil

voice coil is a coil of wire which is attached to the apex of a loudspeaker cone. it provides the motive force to the cone by the reaction of a magnetic field to the current passing through it.

cone

in a loudspeaker, a thin, semi-rigid membrane attached to the voice coil, which moves in a magnetic gap due to which it vibrates and produced sound. it is known as diaphragm and it can also be called a cone, though not all speaker diaphragms are cone-shaped.

surround

surround is also known as front suspension. surround is used to join the cone to the chassis. together with the suspension it controls the cone excursion, and it is also used to determine how energy which is travelling through the cone is absorbed, and how the speaker limits when it reaches the ends of its travel.

dustcap

dustcap is used to protect the voice coil from dust and dirt. it is a part of the cone.

how speaker work

the outer part of the cone is fastened to the outer part of the loudspeaker's circular metal rim. the inner part is fixed to voice coil that sits just in front of a permanent magnet . when loudspeaker is hooked up to a stereo, electrical signals feed through the speaker cables into the coil. it will convert the coil into an electromagnet magnet . when electricity flows back and forth in the cables, the electromagnet either repels or attract the permanent magnet. this moves the coil back and forth, and it pull and push the loudspeaker cone. like a drum skin vibrating back and forth, the moving cone pumps sounds out into the air.in this way loudspeakers works.

Answer from: Quest

i know right it’s not fair some people are just so rude unlike you your actually trying to get to know people and i think that is very kind

Answer from: Quest

answer; dogs;

Answer from: Quest

turnover

the amount of money taken by a business in a particular period.

Another question on Business

Business, 21.06.2019 21:00

Accublade castings inc. casts blades for turbine engines. within the casting department, alloy is first melted in a crucible, then poured into molds to produce the castings. on may 1, there were 230 pounds of alloy in process, which were 60% complete as to conversion. the work in process balance for these 230 pounds was $32,844, determined as follows: exercises during may, the casting department was charged $350,000 for 2,500 pounds of alloy and $19,840 for direct labor. factory overhead is applied to the department at a rate of 150% of direct labor. the department transferred out 2,530 pounds of finished castings to the machining department. the may 31 inventory in process was 44% complete as to conversion. prepare the following may journal entries for the casting department: the materials charged to production the conversion costs charged to production the completed production transferred to the machining department determine the work in process"casting department may 31 balance.

Answers: 1

Answer

Business, 22.06.2019 01:00

The law says your employer is responsible for providing you with a safe and healthy workplace. true or false?

Answers: 1

Answer

Business, 22.06.2019 07:30

An important application of regression analysis in accounting is in the estimation of cost. by collecting data on volume and cost and using the least squares method to develop an estimated regression equation relating volume and cost, an accountant can estimate the cost associated with a particular manufacturing volume. consider the following sample of production volumes and total cost data for a manufacturing operation. production volume (units) total cost ($) 400 4000 450 5000 550 5400 600 5900 700 6400 750 7000 compute b 1 and b 0 (to 2 decimals if necessary). b 1 b 0 complete the estimated regression equation (to 2 decimals if necessary). = + x what is the variable cost per unit produced (to 1 decimal)? $ compute the coefficient of determination (to 4 decimals). note: report r 2 between 0 and 1. r 2 = what percentage of the variation in total cost can be explained by the production volume (to 2 decimals)? % the company's production schedule shows 500 units must be produced next month. what is the estimated total cost for this operation (to 2 decimals)? $

Answers: 1

Answer

Business, 22.06.2019 09:40

The wall street journal reported that walmart stores inc. is planning to lay off 2,300 employees at its sam's club warehouse unit. approximately half of the layoffs will be hourly employees (the wall street journal, january 25-26, 2014). suppose the following data represent the percentage of hourly employees laid off for 15 sam's club stores. 55 56 44 43 44 56 60 62 57 45 36 38 50 69 65 (a) compute the mean and median percentage of hourly employees being laid off at these stores. (b) compute the first and third quartiles. (c) compute the range and interquartile range. (d) compute the variance and standard deviation. (e) do the data contain any outliers? (f) based on the sample data, does it appear that walmart is meeting its goal for reducing the number of hourly employees?

Answers: 1

Answer

You know the right answer?

The organization for economic cooperation and development is an example of which type of initiative...

Questions