By increasing the length of heat exchanger, the effectiveness and cold stream output temperature of the heat exchanger
a- decreases
b- increases
c- does not change

Effectiveness and cold stream output temperature of the heat exchange Increases. So, Answer is b) Increases.

Explanation:

We have a heat exchanger, and it is required to compare the effectiveness and cold stream output if the length is increased.

Heat exchangers are engineering devices used to transfer energy. Thermal energy is transferred from Fluid 1 - Hot fluid (HF) to a Fluid 2 - Cold Fluid (CF). Both fluids 1 and 2 can flow with different values of mass flow rate and different specific heat. When the streams go inside the heat exchanger Temperature of Fluid 1 (HF) will decrease, at the same time Temperature of the Fluid 2 (CF) will increase.

In this case, we need to analyze the behavior taking into account different lengths of heat exchangers. If the length of the heat exchanger increases, it means the transfer area will increases. Heat transfer will increase if the transfer area increases. In this sense, the increasing length is the same than increase heat transfer.

If the heat transfer increases, it means Fluid 1 (HF) will reduce its temperature, and at the same time Fluid 2 (CF) will increase its temperature.

Finally, Answer is b) Effectiveness and cold stream output temperature increases when the length of the heat exchanger is increased.

a saline water is fed to a reverse osmosis unit at flow rate o rotameter connected to reject (retentate) line reads 8 installed in reject and permeate line reads 15.2 milli siemens/cm and 300 micro siemens/com respectively.

your answer is c) plasma

~*"auba14"*~