subject
Chemistry, 29.11.2019 00:31 nculberson6

Afuel gas containing 95 mole% methane and the balance ethane is burned completely with 25% excess air. the stack gas leaves the furnace at 900 degrees celsius and is cooled to 450 degrees celsius in a waste heat boiler, a heat exchanger in which heat lost by cooling gases is used to producde steam from liquid water for heating, power generation, or process applications.

a.) taking as a basis of calculation 100 mol of the fuel gas fed to the furnace, calculate the amount of heat (kj) that must be transferred from the gas in the waste heat boiler to accomplish the indicated cooling.
b.) how much saturated steam at 50 bar can be produced from boiler feedwater at 40 degrees celsius for the same basis of calculation? (assume all the heat transferred from the gas goes into the steam production.)
c.) at what rate (kmol/s) must fuel gas be burned to produce 1250 kg steam per hour (an amount required elsewhere in the plant) in the waste heat boiler? what is the volumetric flow rate (m3/s) of the gas leaving the boiler?
d.) briefly explain how the waste heat boiler contributes to the plant profitablility. (think about what would be required in its absense.)

ansver
Answers: 2

Another question on Chemistry

question
Chemistry, 21.06.2019 16:40
The modern periodic table has groups.
Answers: 1
question
Chemistry, 22.06.2019 11:40
Modern pennies are composed of zinc coated with copper. a student determines the mass of a penny to be 2.482 g and then makes several scratches in the copper coaling (to expose the underlying zinc). the student puts the scratched penny in hydrochloric acid, where the following reaction occurs between the zinc and the hcl (the copper remains undissolved): zn(s) + 2 hcl(aq) → h2(g) + zncl(aq)the student collects the hydrogen produced over water at 25 °c. the collected gas occupies a volume of 0.899 l at a total pressure of 79 j mmhg. calculate the percent zinc (by mass) in the penny. (assume that all the zn in the penny dissolves.)
Answers: 1
question
Chemistry, 22.06.2019 18:00
Answer asap need to be answered by wednesday morning explain how a buffer works, using an ethanoic acid / sodium ethanoate system including how the system resists changes in ph upon addition of a small amount of base and upon addition of a small amount of acid respectively. include the following calculations in your i. calculate the ph of a solution made by mixing 25cm3 0.1m ch3cooh and 40cm3 0.1m ch3coo-na+. [ka = 1.74 x 10-5 m] ii. calculate the ph following the addition of a 10cm3 portion of 0.08 m naoh to 500cm3 of this buffer solution. iii. calculate the ph following the addition of a 10cm3 portion of 0.08 m hcl to 200cm3 of the original buffer solution.
Answers: 3
question
Chemistry, 22.06.2019 18:00
What amount of heat is exchanged when 106.2 grams of substance y goes from a liquid at 35 degrees celsius to a solid at the same temperature? melting point of substance y = 35 degrees c; δhvaporization = 3.67 j/mol; δhfusion = 3.30 j/mol. mwsubstance y = 28.22 g/mol. −12.4 j −3.51 x 102 j 1.24 x 101 j 351 j
Answers: 1
You know the right answer?
Afuel gas containing 95 mole% methane and the balance ethane is burned completely with 25% excess ai...
Questions
question
English, 11.11.2020 17:30
question
Biology, 11.11.2020 17:30
question
Mathematics, 11.11.2020 17:30
Questions on the website: 13722362