Chemistry, 06.06.2020 22:03 wweghorst8275

12) Assume COD entering an anaerobic digester can be modeled as C3H5O3 - , and it ferments via C3H5O2 - C2H3O2 - CO2 H2. Balance this reaction. Next, assume that methane in the reactor results from two pathways: aceticlastic methanogenesis and hydrogenotrophic methanogenesis. If we assume that all necessary carbon and hydrogen for methane production comes only from fermentation of lactate; how much methane (in mg/L) can be produced assuming 25,000mg/L COD entering the anaerobic digester, with all of it being fermented

Answers: 1

Show answers

Answers

Answer from: Quest

it can be observed without changing the identity of the object.

it depends on what substance you're talking about as well as many other factors. in quantum mechanics, the observation of particles affects the observers ability to measure certain properties. for example: you can know the velocity of a particle, but you can't know it's position; or you can know it's position, but not it's velocity. it's like trying to find out where a grain of sand is by throwing other grains of sand at it. once you find out where it is, it's been moved. it's also like trying to find an answer to the question of whether or not a tree falling in a forest makes a sound if nobody is there to hear it. paradoxically, the only way to find out is to be there and hear it.

Answer from: Quest

answer: cellular respiration takes in food and uses it to create atp, a chemical which the cell uses for energy. usually, this process uses oxygen, and is called aerobic respiration. it has four stages known as glycolysis, link reaction, the krebs cycle, and the electron transport chain.

Answer from: Quest

Note that 2 mol dm⁻³ = 2 mol/(dm³)outline: we're given the concentration of hcl, which is 2 mol dm⁻³ (cubic meters in the denominator can represent volume, so i know this is concentration). we're an amount of calcium carbonate caco₃, which is 5 g. we're presented with a chemical equation which includes caco₃ and hcl. we are told to find the volume of hcl. from what we see so far, this seems to be a stoichiometry problem. we'll have to use the given information about calcium carbonate to find the amount of moles of hcl needed to fully react with calcium carbonate. then we'll have information about the moles of hcl and the concentration of hcl; that will be enough to figure out volume according to the formula concentration = moles / volume.======all the answer choices are not in dm.convert the given concentration so that it uses cm⁻³.we can use conversion factors. we have to cube our conversion factors so that dimensional analysis works.we can convert to meters first, using the fact that 10 dm = 1 m ⇔ 10³ dm³ = 1 m³then we use the fact that 10² cm = 1 m ⇔ (10² cm)³ = (1 m)³ ⇔ 10⁶ cm³ = 1 m³so converting: $\dfrac{\text{2 mol}}{\text{dm}^{3}} \cdot \dfrac{\text{10}^3\text{ dm}^3}{\text{1 m}^3} \cdot \dfrac{\text{1 m}^3}{10^6\text{ cm}^3} \\ \\ = \dfrac{\text{2 mol}}{1} \cdot \dfrac{\text{10}^3}{1} \cdot \dfrac{1}{10^6\text{ cm}^3} \qquad \text{\footnotesize cancelling units} \\ \\ = \dfrac{2\text{ mol}}{10^3 \text{ cm}^3} \\ \\ = 0.002\text{ mol/cm}^3$ now we have to find the moles of hydrochloric acid neededfind the moles of calcium carbonate. we have to find the molar mass of calcium carbonate, caco₃, which can be found by molar mass = (mass ca) + (mass c) + 3(mass o) = 40 + 12 + 3(16) = 100 g/molconvert the given 5 g to moles: mol caco₃ = 5 g caco₃ * 1 mol/(100 g) = 0.05 mol caco₃use stoichiometry (ratios) to figure out the moles of hcl needed. ratio wise, there's 2 hcls for every caco₃, so use dimensional analysis mol hcl = mol caco₃ * (2 mol hcl) / (1 mol caco₃) = 0.05 mol hcl * 2 = 0.1 mol hcl we have 0.1 mol hcl and concentration of hcl (0.002 mol/cm³).we need to find volumesince concentration = moles / volume, rearrange to get volume = moles / concentration volume = 0.1 mol / (0.002 mol/cm³) volume = 50 cm³

Answer from: Quest

100cm, because 11.0 cm is 3 figures as they've chosen to include the decimal point. if you have a 3 digit number then anything after the second digit will become 0 if it's to 2 significant figures

Another question on Chemistry

Chemistry, 21.06.2019 13:00

What is the ph of a solution with a concentration of 5.2 × 10–8 m h3o+?

Answers: 1

Answer

Chemistry, 22.06.2019 01:30

Follow the steps provided in the simulation to add water to the graduated cylinder, select one of the three samples (copper, silver, or gold), set its mass to the values given in the statements below, and calculate its density. here is a summary of the steps required: add water by clicking and holding prepare a known volume of water button. until the desired volume of water has been added. if more than the desired volume is added, click the reset button. button and redo the procedure. a single click will add about 21.0 ml of water. to set the mass, click and hold weigh out metal button. until the desired amount of metal is added to the weighing pan. once the desired mass of the metal is added, release the button. transfer the metal to water and then click on calculate density button. to see how the density is calculated using water displacement to measure the volume of the solid. to save time you can approximate the initial volume of water to â±1 ml and the initial mass of the solid to â±1 g. for example, if you are asked to add 23 ml of water, add between 22 ml and 24 ml. which metals in each of the following sets will have equal density? check all that apply.

Answers: 1

Answer

Chemistry, 22.06.2019 10:10

How do you identify the anode on a power source such as a battery? how do you identify the cathode? how are terms anion and cation?

Answers: 1

Answer

Chemistry, 22.06.2019 21:30

What is happening when the water inside a kettle heats up and begins to boil

Answers: 1

Answer

You know the right answer?

12) Assume COD entering an anaerobic digester can be modeled as C3H5O3 - , and it ferments via C3H5O...