Monel metal is a corrosion-resistant copper-nickel alloy used in the electronics industry. a particular alloy with a density of 8.80 g/cm3 and containing 0.073% si by mass is used to make a rectangular plate that is 15.0 cm long, 12.5 cm wide, and 2.50mm thick and has a 2.50-cm-diameter hole drilled through its center such that the height of the hole is 2.50mm .

the silicon in the plate is a mixture of naturally occurring isotopes. one of the those isotopes is silicon-30, which has an atomic mass of 29.97376 amu and a percent natural abundance of 3.10%

To find the volume of the plate without accounting for the hole firstly
V = (15.0 cm)(12.5 cm)(0.250 cm) = 46.875 cm^3
and the volume of the hole is
(pi)(1.25 cm)^2(0.250 cm) = 1.2272 cm^3
we will subtract the volume of the hole from the rest 45.648 cm^3
the multiply this by the density of the alloy to find the mass
(8.80 g/cm^3)(45.648 cm^3) = 401.701 g.
0.044% of this is Si, so (0.00044)(401.701 g) = 0.17675 g is silicon.
by the number of atoms and using average atomic mass of silicon and Avogadro's number to find the number of silicon atoms:
(0.17675 g)(1 mol/28.0855 g)(6.022E23 atoms/1 mol) =3.794E21atoms of Si
3.10% of these are Si-30:(0.0310)(3.794E18 atoms)=1.176E20 atoms of Si-30 and with two significant figures, 1.2E20 atoms.
hope this helps

It would be

Atomicity occurs to prevent updates of the database occurring only partially, which can cause greater problems than rejecting the whole series outright.some are monatomic, diatomic, triatomic etc because it shows the number of atoms. for example, monatomic means it contains only one atom.