Chemistry, 19.03.2021 19:40 brainy51

Definition: The various atmospheric conditions that occur at any given time in any place. Example: 94º and sunny
es ))
Term: Type term here

Answers: 3

Show answers

Answers

Answer from: Quest

Iwould you figure it out but you don't have a picture or in your question as to what the physical property you're looking for is

Answer from: Quest

a saline water is fed to a reverse osmosis unit at flow rate o rotameter connected to reject (retentate) line reads 8 installed in reject and permeate line reads 15.2 milli siemens/cm and 300 micro siemens/com respectively.

Answer from: Quest

The answer to your question really depends on three things: how much water you have, how cold it is to start out, and how cold the things around it are. water actually freezes when it gets to 32 degrees fahrenheit (0 degrees celsius), but the time it takes to get there may be different. let's start with the first. if you take two glasses, and fill one with a tiny bit of water, and the other about halfway, then put them both in the freezer, the one with less water will freeze first (you can try this at home, but i recommend using plastic cups and not glass ones). now let's move on to the second part. let's say you have two glasses, and you fill one with really cold water that has been in the refrigerator, and the other with really hot water from the sink. if you put both of them in the freezer, the one that started out colder will freeze first. for the third part, let's imagine that you have two glasses with the same amount of water in them, and the water is at the same temperature. imagine putting one outside on a really really cold day in georgia, and having a friend in alaska put one outside on the same day. since it would be so much colder in alaska, the glass of water there would freeze before yours. so, if you took a tiny bit of really cold water in a glass, and put it outside on a cold day in alaska, it would freeze a lot faster than a big glass of hot water outside on a cold day in georgia.

Answer from: Quest

answer : third trial had the contaminated sample and the correct value for dhrxn should be 1000 kj/mol

explanation :

let us write down the given equations

equation 1 : $4x (s) + 3o_{2} (g) \rightarrow 2x_{2}o_{3} (s) h rxn = -600 kj/mol$

equation 2 : $2x (s) + 3cl_{2} (g) \rightarrow 2xcl_{3} (s) h rxn = -800 kj/mol$

equation 3 : $4xcl_{3} (s) + 3o_{2} (g) \rightarrow 2x_{2}o_{3} (s) + 6cl_(2} h rxn = -200 kj/mol$

let us use hess's law to find out which 2 equations can be added to get the third equation.

let us reverse equation 2 and multiply it by 2. the new equation that we get is,

equation 4 : $4xcl_{3} (s) \rightarrow 4x (s) + 6cl_{2} ( h rxn = (+800) \times 2 kj/mol$

let us add equation 1 & 4

$4x (s) + 3o_{2} (g) \rightarrow 2x_{2}o_{3} (s) h rxn = -600 kj/mol$

$4xcl_{3} (s) \rightarrow 4x (s) + 6cl_{2} ( h rxn = (+1600) kj/mol$

$4xcl_{3} )s) + 3o_{2} \rightarrow 2x_{2}o_{3} (s) + 6cl_{2} (g) h rxn = (+1000) kj/mol$

the above equation is similar to equation 3 but has different value for dhrxn.

therefore third trial had the contaminated sample and the correct value for dhrxn should be 1000 kj/mol

Another question on Chemistry

Chemistry, 22.06.2019 07:50

What material does not melt at any temperature

Answers: 2

Answer

Chemistry, 22.06.2019 14:50

Which of the following is most likely true about water in chemical systems? a) water dissolves nonpolar ionic compounds. b) water dissociates ionic compounds. c) water dissociates covalent molecules. d) water dissolves nonpolar covalent substances.

Answers: 1

Answer

Chemistry, 22.06.2019 16:50

Answer asap need by wednesday morning calculate the ph of 0.16m ch3cooh which has ka = 1.74 x 10-5 mol dm-3 best answer will be brainliest

Answers: 3

Answer

Chemistry, 22.06.2019 19:00

What is the compound name for the formula [ru(en)2cl2]2+ and [co(en)cl2br]-

Answers: 1

Answer

You know the right answer?

Definition: The various atmospheric conditions that occur at any given time in any place. Example:...