What are the methods used to determine the boiling point of a compound?​

There are a variety of methods by which a sample's boiling point can be determined, including distillation, reflux, and by using a Thiele tube. The most straightforward method uses a Thiele tube, and has the advantage of using less than 0.5mL of material.

Distillation Method

There are simpler methods than a distillation to measure a compound's boiling point, and it is recommended to explore other options (e.g. Thiele tube) if this is the only goal. However, if materials are limited, or if a purification is planned anyhow, a distillation can be used to determine a compound's boiling point. The distillation technique is discussed in great detail in Chapter 5.

A simple distillation should suffice for most situations and at least 5mL of sample should be used in the distilling flask along with a few boiling stones or stir bar. As the bulk of the material distills, the highest temperature noted on the thermometer corresponds to the boiling point. A major source of error with this method is recording too low a temperature, before hot vapors fully immerse the thermometer bulb. 5 Be sure to monitor the thermometer periodically, especially when the distillation is active. Record the barometric pressure along with the boiling point.

Reflux Method

A reflux setup can also be used to determine a compound's boiling point. Reflux is when a liquid is actively boiling and condensing, with the condensed liquid returning to the original flask. It is analogous to a distillation setup, with the main difference being the vertical placement of the condenser.

Thiele Tube Method

There are a variety of methods by which a sample's boiling point can be determined, including distillation, reflux and by using a Thiele tube. The most straightforward method uses a Thilele tube, and has the advantage of using less than 0.5ml of material.

fire could start, buildings collapsing, and ash falling from the sky.

explanation:

this is because the buildings or plants could catch on fire and the buildings would most likely collapse. lastly ash would fall because all the burning would cause ash to fall from the sky.

hope this .

your answer is a. the enthalpy of formation for a pure element in its standard state is always positive.