Draw a finite state machine (fsm) for a string representing a single time of day. your fsm should accept times such as 12: 36 pm, 1: 59 am, 4: 00 pm, 2: 45 am. note that there are no leading zeros. also, "am" and "pm" are lowercase and hace no periods. a terminal error state is not neccesary. to make the task easier, you can make up any grouping you want. for example, you may wish to leat represent any digit, let < 1> represnt the digit 1, let < 012> represent and digit 0-2, and let represent a space. time statements are formatted in many ways but we want your fsm to only accept the above time format -- not military time or any other time format.

View Image

Explanation:

A time clock could either start with 1 digit or 2 digit. It could be from 1:00-9:00 or 10:00-12:00.

So if it starts with 2 digit, then the first number must be a 1 because 10:00, 11:00, and 12:00 starts with a 1. That means the second digit after that must be between 0-2 hence the output <012>.

If it starts with 1 digit then the number could be from 1-9 for 1:00-9:00.

After the first few digit comes the colons <:>.

After the colons come the digits for the minutes.

The first digit for the minutes could be from 0-5 because minutes counts from 0:00-0:59. Also, this means that the second digit for the minute must be from 0-9.

After the digits for the minutes comes a space to seperate the numbers from the <am> and <pm>.

After the space you place in the <am> and <pm>

And this is just a rough sketch. You need to go back and replace all the non-digit numbers such as <:>, <a>, <p>, and <m> with some numerical representation for those letters.

Ican of you tell me who sally is

Work with a monitor that’s calibrated and profiled. for critical image editing, calibration and profiling are essential. otherwise, the image you see on your monitor looks different on other monitors or when printed.plan to use adjustment layers to adjust the tonal range and color balance of your image. adjustment layers let you go back and make successive tonal adjustments without discarding or permanently modifying data from the image layer. keep in mind that using adjustment layers adds to the file size of the image and demands more ram from your computer. accessing the color and tonal commands in the adjustments panel automatically creates adjustment layers.if you don’t want to use adjustment layers, you can apply adjustments directly to an image layer. remember that some image information is discarded, when making a color or tonal adjustment directly to an image layer.for critical work and maximum preservation of image data, it’s best if the image you work with is 16 bits per channel (16‑bit image) rather than 8 bits per channel (8‑bit image). data is discarded when you make tonal and color adjustments. the loss of image information is more critical in an 8‑bit image than a 16‑bit image. generally, 16‑bit images have a larger file size than 8‑bit images.duplicate or make a copy of the image file. working on a copy of your image preserves the original in the event you want to use the image in its original state.remove any flaws such as dust spots, blemishes, and scratches from the image before making color and tonal adjustments.open the info or histogram panel in expanded view. as you evaluate and correct the image, both panels display invaluable feedback on your adjustments.you can make a selection or use a mask to confine your color and tonal adjustments to part of an image. another way to apply color and tonal adjustments selectively is to set up your document with image components on different layers. color and tonal adjustments are applied to only one layer at a time. only the image components on the targeted layer are affected.