Computers and Technology, 06.03.2020 11:09 math10030

You have enabled IPv6 on two of your routers, but on the interfaces you have not assigned IPv6 addresses yet. You are surprised to learn that these two machines are exchanging information over those interfaces. How is this possible?a. Due to anycast addressingb. Due to ICMPv6c. Due to the NATv6 capabilityd. Due to the link-local IPv6 addresses

Answers: 2

Show answers

Answers

You have enabled IPv6 on two of your routers, but on the interfaces you have not assigned IPv6 addresses yet. You are surprised to learn that these two machines are exchanging information over those interfaces. How is this possible?

a. Due to anycast addressing

b. Due to ICMPv6

c. Due to the NATv6 capability

d. Due to the link-local IPv6 addresses

The correct answer is D. Due to the link-local addresses

Explanation:

LINK-LOCAL ADDRESS

Link-local addresses are addresses that can be used for unicast communications on a confined LAN segment. The requirement with these addresses is that they are only locally-significant (i.e., restricted to a single LAN broadcast domain) and are never used to source or receive communications across a layer-3 gateway.

Typically, link-local IPv6 addresses have “FE80” as the hexadecimal representation of the first 10 bits of the 128-bit IPv6 address, then the least-significant 64-bits of the address are the Interface Identifier (IID). Depending on the IID algorithm the node’s operating system is using, the IID may use either modified EUI-64 with SLAAC, the privacy addressing method (RFC 4941)), or the newly published Stable SLAAC IID method(RFC 8064).

When a host boots up, it automatically assigns an FE80::/10 IPv6 address to its interface. You can see the format of the link-local address below. It starts with FE80 and is followed by 54 bits of zeros. Lastly, the final 64-bits provide the unique Interface Identifier.

FE80:0000:0000:0000:abcd:abcd:abcd:abcd

Link-local IPv6 addresses are present on every interface of IPv6-enabled host and router. They are vital for LAN-based Neighbor Discovery communication. After the host has gone through the Duplicate Address Detection (DAD) process ensuring that its link-local address (and associated IID) is unique on the LAN segment, it then proceeds to sending an ICMPv6 Router Solicitation (RS) message sourced from that address.

IPv6 nodes send NS messages so that the link-layer address of a specific neighbor can be found. There are three operations in which this message is used:

▪ For detecting duplicate address

▪ Verification of neighbor reachability

▪ Layer 3 to Layer 2 address resolution (for ARP replacement) ARP is not included in IPv6 as a protocol but rather the same functionality is integrated into ICMP as part of neighbor discovery. NA message is the response to an NS message. From the figure the enabling of interaction or communication between neighbor discoveries between two IPv6 hosts can be clearly seen.

Answer from: Quest

the answer would be d. online forums.

hope it

Answer from: Quest

This is main visit iowa city

Another question on Computers and Technology

Computers and Technology, 22.06.2019 03:10

This program reads a file called 'test.txt'. you are required to write two functions that build a wordlist out of all of the words found in the file and print all of the unique words found in the file. remove punctuations using 'string.punctuation' and 'strip()' before adding words to the wordlist. write a function build_wordlist() that takes a 'file pointer' as an argument and reads the contents, builds the wordlist after removing punctuations, and then returns the wordlist. another function find_unique() will take this wordlist as a parameter and return another wordlist comprising of all unique words found in the wordlist. example: contents of 'test.txt': test file another line in the test file output: ['another', 'file', 'in', 'line', 'test', 'the']

Answers: 1

Answer

Computers and Technology, 22.06.2019 09:50

17. implement the jvm dload instruction for the mic-2. it has a 1-byte index and pushes the local variable at this position onto the stack. then it pushes the next higher word onto the stack as well

Answers: 2

Answer

Computers and Technology, 22.06.2019 11:10

The total cost of textbooks for the term was collected from 36 students. create a histogram for this data. $140 $160 $160 $165 $180 $220 $235 $240 $250 $260 $280 $285 $285 $285 $290 $300 $300 $305 $310 $310 $315 $315 $320 $320 $330 $340 $345 $350 $355 $360 $360 $380 $395 $420 $460 $460

Answers: 2

Answer

Computers and Technology, 23.06.2019 18:00

Freya realizes she does not have enough in her bank account to use the debit card. she decides to use a credit card instead. which questions should freya answer before using a credit card? check all that apply. can i pay at least the minimum payment each month? can i make payments on time and avoid late fees? will i have to take out a loan? how much in finance charges can i afford to pay? should i talk to a consumer credit counseling service?

Answers: 1

Answer

You know the right answer?

You have enabled IPv6 on two of your routers, but on the interfaces you have not assigned IPv6 addre...

Questions