We use Huffman’s algorithm to obtain an encoding of alphabet {a, b, c} with frequencies fa, fb, fc. In each of the following cases, either give an example of frequencies (fa, fb, fc) that would yield the specified code, or explain why the code cannot possibly be obtained (no matter what the frequencies are).

a. Code : {0, 10, 11}
b. Code : {0, 1, 00}
c. Code : {10, 01, 00}

When you collaborate or meet with a person or group online, it is called

The instruction ishl (shift left integer) exists in jvm but not in ijvm. it uses the top two values on the stack, replacing the two with a single value, the result. the sec- ond-from-top word of the stack is the operand to be shifted. its content is shifted left by a value between 0 and 31, inclusive, depending on the value of the 5 least signifi- cant bits of the top word on the stack (the other 27 bits of the top word are ignored). zeros are shifted in from the right for as many bits as the shift count. the opcode for ishl is 120 (0x78).a. what is the arithmetic operation equivalent to shifting left with a count of 2? b. extend the microcode to include this instruction as a part of ijv.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.