You purchased an Acme computer with the following features:

• 95% of all the memory access are found in the cache.
• Each cache block is two words, and the whole block is read on any miss.
• The processor sends references to its cache at the rate of 109 words per second.
• 25% of those references are writes.

Assume that the memory system can support 109 words per second, reads or writes. The bus reads or writes a single word at a time (the memory cannot read or write two words at once). Assume at any one time, 30% of the blocks in the cache have been modified. The cache uses write-allocate on a write miss.

You are considering adding a peripheral to the system and you want to know how much of the memory system bandwidth is already used. Calculate the percentage of memory-system bandwidth used on the average in the two cases below. Be sure to state your assumptions.

(a) The cache is write-through.

(b) The cache is write-back.

It policy compliance and emerging technologies respond to the following: propose at least three control measures that organizations need to put in place to ensure that they remain complaint with emerging technologies and in a continually changing it environment. examine the correlation of effective configuration management and change control procedures to remain compliant with emerging technologies and it security changes.

Now you’re on your own. include a short summary of this section with plots in your lab report. write a matlab script file to do steps (a) through (d) below. include a listing of the script file with your report. 1 the soundsc(xx,fs) function requires two arguments: the first one (xx) contains the vector of data to be played, the second argument (fs) is the sampling rate for playing the samples. in addition, soundsc(xx,fs) does automatic scaling and then calls sound(xx,fs) to actually play the signal. mcclellan, schafer, and yoder, dsp first, 2e, isbn 0-13-065562-7. prentice hall, upper saddle river, nj 07458. c 2015 pearson education, inc. 4 mcclellan, schafer and yoder, signal processing first. prentice hall, upper saddle river, new jersey, 2003. c 2003 prentice hall. (a) generate a time vector (tt) to cover a range of t that will exhibit approximately two cycles of the 4000 hz sinusoids defined in the next part, part (b). use a definition for tt similar to part 2.2(d). if we use t to denote the period of the sinusoids, define the starting time of the vector tt to be equal to t , and the ending time as ct . then the two cycles will include t d 0. finally, make sure that you have at least 25 samples per period of the sinusoidal wave. in other words, when you use the colon operator to define the time vector, make the increment small enough to generate 25 samples per period. (b) generate two 4000 hz sinusoids with arbitrary amplitude and time-shift. x1.t / d a1 cos.2

Answer these and get 40 points and brainliest