How do I get through this? I am doing a breakout box online and not very sure how to get all the hay and get to the barn in 9 steps. I need to fill in the blank step spaces. Don't even know what subject to put this under.

Farah works in an office with two other employees. all three share a printer and an internet connection. the utility that makes this possible is defragger quicktime soho winzip

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

You draw two cards from a standard deck of 52 cards, but before you draw the second card, you put the first one back and reshuffle the deck. (a) are the outcomes on the two cards independent? why?