subject

Design a decimal arithmetic unit with two selection variables, V1, and Vo, and two BCD digits, A and B. The unit should have four arithmetic operations which depend on the values of the selection variables as shown below. V1=0011, V0=0101 and output functions are as follows; 1- A+9's complement of B 2- A+B 3- A+10's complement of B 4- A+1 (add 1 to A) (You can see question number 3 in the attached file)


Design a decimal arithmetic unit with two selection variables, V1, and Vo, and two BCD digits, A an

ansver
Answers: 2

Another question on Computers and Technology

question
Computers and Technology, 22.06.2019 16:20
Consider the following statements, then select one of the answers below: the signal() function shown below registers "sig_handler()" as the signal handler function for the sigkill signal, without the complexity of using when the sigkill signal is sent to a process running this code, by a user typing "kill -kill ", where the correct process id is used for to target the process, sig_handler() will be executed.
Answers: 1
question
Computers and Technology, 23.06.2019 09:30
:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.
Answers: 1
question
Computers and Technology, 23.06.2019 18:30
Write a program that prints the day number of the year, given the date in the form month-day-year. for example, if the input is 1-1-2006, the day number is 1; if the input is 12-25-2006, the day number is 359. the program should check for a leap year. a year is a leap year if it is divisible by 4, but not divisible by 100. for example, 1992 and 2008 are divisible by 4, but not by 100. a year that is divisible by 100 is a leap year if it is also divisible by 400. for example, 1600 and 2000 are divisible by 400. however, 1800 is not a leap year because 1800 is not divisible by 400.
Answers: 3
question
Computers and Technology, 24.06.2019 03:30
Which explains extrinsic motivation? a)motivation in which there is a reward b)motivation that is personally satisfying c)motivation that is personally meaningful d)motivation in which the subject is interesting
Answers: 1
You know the right answer?
Design a decimal arithmetic unit with two selection variables, V1, and Vo, and two BCD digits, A and...
Questions
question
Mathematics, 20.09.2020 01:01
question
Health, 20.09.2020 01:01
question
Mathematics, 20.09.2020 01:01
question
English, 20.09.2020 01:01
question
Mathematics, 20.09.2020 01:01
Questions on the website: 13722363