The method shown below, makeJunk generates compile-time error: "unreported exception java. io. IOException; must be caught or declared to be thrown".
Without changing the behavior (any part of the method body ) and without changing the number of arguments the function takes or its visibility, add the necessary code that will permit this code to compile without error.

Suppose we have a byte addressable computer that has a 32-byte cache with 8 bytes per block. the memory address is 8 bits long. the system accesses memory addresses (in hex) in this exact order: 6e, b9, 17, e0, 4e, 4f, 50, 91, a8, ab, ad, 93, and 94. (a) assuming the cache is direct mapped, what memory addresses will be in cache block 2 after the last address has been accessed? (b) assuming the cache is direct mapped, what is the hit ratio for the entire memory reference sequence given, assuming the cache is initially empty? (c) assuming the cache is 2-way set associative with a lru replacement policy, what is the hit ratio?

When you mouse over and click to add a search term this(these) boolean operator(s) is(are) not implied. (select all that apply)?

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?