The Pentium 4 Prescott processor, released in 2004, had a clock rate of 3.6GHz and voltage of 1.25V. Assume that, on average, it consumed 10W of static power and 90W of dynamic power. The Core i5 Ivy Bridge, released in 2012, has a clock rate of 3.4GHz and voltage of 0.9V. Assume that, on average, it consumed 30W of static power and 40W of dynamic power. 1.8.1 [5] < §1.7> For each processor find the average capacitive loads. 1.8.2 [5] < §1.7> Find the percentage of the total dissipated power comprised by static power and the ratio of static power to dynamic power for each technology. 1.8.3 [15] < §1.7> If the total dissipated power is to be reduced by 10%, how much should the voltage be reduced to maintain the same leakage current? Note: power is defined as the product of voltage and current.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to