After a chart has been inserted and formatted, is it possible to change the data range it refers to or to add new rows of data? A:No, additional data cannot be included in a chart once it has been created; the user should delete the chart and create a new chart.
B:Yes, click the Select Data button in the Data group under the Design tab to extend or reduce the data range.
C:Yes, click the chart, select the additional rows or columns of data to add, and press Enter on the keyboard.
D:Yes, double-click the chart and select Properties from the list; in the Properties box, insert the new data range to include in the chart.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Which of the following is not an enhancement to the standard wiki to make it more attractive for corporations? encryptionwork spacespermission toolspredictive text

What is a number system, and what is the total number of digits used in this system called? a number system is a system that uses different (options: a) numbers b) symbols c) codes d) digits e) alphabets) to represent different numbers. the total number of digits used in a number system is known as its (options: 1) processor 2) converter 3) radix 4) least significant digit 5) most significant digit)